measure your weight and height before you start

Snowboard Sizing Guide: Selecting A Snowboard

Buying a snowboard is not as easy as it might appear and also the main concern should definitely not be: ‘Just how will this great board appearance with the rest of my equipment?’.

You have to recognize plenty of features of on your own, about snowboards as well as concerning riding styles before you could select a board that will certainly fit you and your riding style.

This guide will assist you with the fundamentals.

A Detailed Look At Snowboards

Prior to you could find out snowboarding you will initially should discover its primary tool: the Snowboard.

You will certainly need to know exactly what a snowboard consists of and exactly what the different aspects are prior to you can pick which snowboard is best for you as well as just how you should use your snowboard.

In this area you will certainly find out that snowboards now-a-days are very technological feats of engineering. If you have a snowboard on your own see to it to identify the following aspects:

Snowboard sizing


The snowboard’s base is all-time low side of the snowboard or the component of the board that touches the snow.

The majority of snowboard bases are made from a polyethylene called P-Tex. These bases are made in either methods: sintered or extruded.

Extruded bases are thawed and also cut to form. Sintered bases are ground into powder, heated up, pressed and also cut into form.

A sintered base is superior – it’s more long lasting, much faster as well as holds wax much better compared to an extruded base.

It’s additionally much more pricey and hard to repair. If you’re seeking high performance, go with a sintered base; for a board on a spending plan, an extruded model will certainly do.

Also far better compared to sintered P-Tex base is a graphite base.

They hold wax even better and also run also quicker. Graphite basis are constantly deep black as well as are primarily found on fast racing boards.


Snowboard sizing: camber

Camber is the quantity of room beneath the center of a snowboard when it lays on a flat surface area as well as its weight rests on the tip and also tail.

Simply puts, this is the mild arch the board makes when you rest it on a flat surface area.

It’s closely related to bend: the greater the camber, the even more pressure the board places at the nose and tail.

A flat camber suggests a board may rotate conveniently, which could be great for specific freestyle relocations.

In an utilized board, nonetheless, it might also be an indication that the board is broken.

In the majority of new boards you want a somewhat bouncy camber, which helps maintain the board at higher rates and on harder snow.

It likewise makes it much easier to turn the snowboard.

Contact Points

Contact Points are the factors at which the board get in touches with the snow without the stress of the biker being displaced on the board.

This is additionally called the board’s wheel base.

The contact points can be discovered by positioning the board on a smooth, level surface after that move a paper under the center of the snowboard, slide it towards the nose or tail until it stops.


Edge refers to the steel edge of the snowboard. The toe edge is the edge at the toeside of the snowboard. The heel edge is the edge at the heel side of the snowboard.

Effective Edge

The length of the metal edge on the snowboard which touches the snow, called the edge and is utilized to turn the snowboard.

It does not include the edge of the tip or tail. The efficient edge is in contact with the snow when the board is in a sculpted turn.

A longer reliable edge makes for a much more stable, and also manageable flight; a much shorter reliable edge creates a looser, and also a lot more conveniently turning board.

Sidecut Radius

Sidecut Radius is the measurement of just how deeply or shallowly the boards cut is from the nose of the board to the waistline (or center of the board).

This is what assists the board turn. The smaller sized the sidecut radius the tighter you will certainly have the ability to turn.

A board with a bigger sidecut will certainly make big arching turns. It is the radius of a circle that makes the hourglass shape of the snowboard and thus just how it is specified and determined.

It works in conjunction with the running length of the snowboard.

Flex Point

The flex point is located between the two bindings and also is the factor where the board starts or ends its flex and allows for sidecut span contact.


If your snowboard has a similar front and back side after that the side that is turned up higher is usually the nose. Alpine boards typically have a pointier nose.

Nose/Tip Length

Length of board from the best part of the board’s nose to the suggestion of the nose.

Nose/Tip Width

The widest part of the board gauged throughout the front idea or nose area of the board.

Overall Length

Overall Size is gauged from the pointer of the board to the tail and also is generally revealed in Centimeters (cm).

Stomp Pad

A stomp pad or nonskid pad is a rubber mat that you could stick in addition to your snowboard next to your backfoot binding.

It is made use of when you have to slide with just your front foot bound to your snowboard, as an example when you are exiting a lift.

Without a stomp pad you might glide off your board, catch the snow with your back foot as well as draw your legs apart, which might be exceptionally painful.


The rear end of the snowboard, which is contrary of the nose/tip. Often the tail is flatter than the tip as well as is much more squarely cut.

Some alpine boards have a split in the tail to provide more transforming power and sychronisation in broadband transforms.

Freestyle boards will frequently have similar ideas and also noses to make it less complicated to ride “fakie” (with the front foot in the back).

Tail Length

The length of board from the largest part of the board’s tail to the tip of the tail is referred to as the tail length.

Tail Width

The widest part of the board gauged across the tail’s idea or tail location of the board is the tail width.


Opposite of the base, the leading or deck of the board is where the bindings are mounted and also the cyclist stands.

Most boards have mounting openings in the deck where the bindings can be screwed right into.

Area the openings allow you to link your bindings to your board at various angles or positions.

Waist Width

Waist width is the narrowest factor of the board. This is usually the middle of the sidecut, located in between the bindings.

Waist width of a board need to be relative to the dimension of your feet.

Boards with a slim waist width are quicker from side to edge, yet if your feet are size 11 or even more you will probably require a larger board.

Or else, your toes may hang over the side and also cause toe drag, which will certainly slow you down.

Which Board To Get?

In general, less costly boards will be much heavier in weight as well as less complex in style.

As boards get more costly they become lighter and also have extra layout functions to accommodate different styles of riding.

As you proceed in your snowboarding abilities you will learn which includes a brand-new snowboard must have and your demands will certainly end up being more particular.

Beginning boarders need to choose a less costly board that will certainly show them their precise requirements as well as choices.

What is my Skill Degree?

Once again there are roughly 3 classes to identify right here:

  • Beginner: from complete newbie to having a couple of days of riding experience
  • Intermediate: comfy with typical riding strategies and beginning to try tricks
  • Advanced: comfortable with riding all pistes and also off slope. Advanced methods as well as skills

Read: How to learn snowboard

What is my preferred Riding Style?

As soon as you have advanced from a newbie to an extra knowledgeable boarder, you might intend to pick an unique Riding Style and adjust your equipment according to that choice.

Once more there are mainly three courses of snowboard riding style although there are numerous subclasses.

That area will describe how the different Snowboarding Riding Style function so you could decide. Basically these are the major classes:

  • Freestyle
  • Freeride
  • Freecarve

A lot of boards will certainly remain in 1 of these classifications. Some beginner boards might be a mix of Freestyle as well as Freeride.

It is best to choose a board that will fit your style as soon as possible instead of learning a specific style on a combination board.

Lots of snowboarders learn the best ways to ride on a FreeRide/FreeStyle board and afterwards choose among these styles. FreeCarving is often chosen by more knowledgeable FreeRide boarders.

What Length should my Snowboard be?

Length is among one of the most vital features of a snowboard. As a whole, there are a few rules:

  • For a person with typical build, the board’s size should reach the chin or mouth of the individual when put on the ground.
  • Heavier riders must have longer less flexible boards
  • Lighter riders ought to have shorter much more adaptable boards
  • Freestyle riding is often performed with shorter board to allow better ability to move.
  • Freeriding, deep snow and racing boards will certainly be much longer in size.

What Width should my Snowboard be?

  • You need to ensure that your feet do not hang over the board excessive. Feet that hang over the sides of a board reason Toe and also Heel drag. Drag will certainly make it tough to sculpt on your sides. So riders with big feet must acquire wider boards or change the angle of their feet. Larger boards are the most common solution.
  • Men and much heavier riders will commonly require wider boards than females or lighter people

How flexible should my Snowboard be?

There are 2 kinds of flexibility:

  • Torsional Flex: exactly how adaptable the board is across its size. Much more torsional flex will certainly make it easier to turn the board which is very important in sharper turns.
  • Longitudinal Flex: exactly how flexible the board is from idea to tail. More longitudinal flex will make it easier to flex the board in the length.

FreeStylers need even more versatile boards for more board control and maneuverability. FreeRiders as well as especially FreeCarvers need stiffer boards to keep their boards under control in higher rates. Much heavier riders need stiffer boards.

How deep should the sidecut get on my Snowboard?

Generally there are a couple policies:

  • The depth of the sidecut has every little thing to do with turning
  • A further sidecut makes it simpler to turn, which is why beginner boards often have a further sidecut

Snowboard Dimension Chart

Below is a sizing chart to much better help you choose the board with the best measurements for you.

Understand that board size is significantly a personal preference which these numbers are never uncompromising.

The lengths mentioned are family member recommendations for jam-packed snow as well as could be raised by 3cm-9cm if you are riding in powder.

%d bloggers like this: